Sunday, March 3, 2024

Spring Fever Tutorial

 


Here is what we will be making:

 

 


Supplies:

My Kit Spring Fever HERE.

A Mask of choice or the mask I used is LLM_1359 found on my blog HERE.


Springtime Sarah  by Myriadelle. You can find her at DEVIANT ART.

Open a transparent image 800x800. We can resize later.

Paper of choice or use my choice. I used paper BG: SF_7

Apply your mask. Duplicate this layer.

 

Copy and paste the house as a new layer and resize to 75%. Move it up near the top of the canvas.

Flowered Fence resized to 70%. Move this one a little to the right and

To the way you like it.  Duplicate and mirror.

Copy and paste the hillside element and slightly below the house layer. Make sure this layer is

 under the house layer with the flowers showing on the side of the house.

Flower Cart mirrored and resized to 50%. Place on the right.

Pathway. Not resized. Place towards middle.

Archway Not resized. Place in the middle where 

the pathway starts. Also, make sure your flower

cart is noticeable behind it.

Vine  85%. Place on the Archway entrance. Duplicate and mirror.

Make sure the duplicate is on the entrance on the other side.

Grass and Rocks resized to 70. Place on the bottom right.

Old Flower Can Resized to 50%. Place to the right side of the archway. 

Make sure this element is not fully covering the grass and rocks.

Work Gloves Resized to 25%. On or near the can.

Kitty In a pot resized to 35%. Place to the left of the archway.

Myriadelle TUBE or tube of choice, Resized to 50% and mirrored.

Place your tube where you want, I placed mine in the middle of the canvas.

 

Add your copyright for the tube. Also, add your tag’d by line if you want.

 

Size to your liking, and save as a png. I resized mine by 80%.

 

We are done!

Thank you for doing this tutorial!  PLEASE! show me your results, 

although not a “rule”, I do like

seeing the results of my tutorials by others!

 

 

Thursday, October 5, 2023

Cute & Spooky Tutorial

 





 

You will need the following supplies. If you can't get them

then do the best you can by obtaining similar supplies or supplies

of your own choice. 


My kit, Spooky Cute. You can find it on my blog HERE.

Your own word art or My WordArt HERE.

It is the last one named “Too Cute To Spook”.

A tube of choice. I used the witch and a cat by Tooshtoosh HERE.

The site was down at the time of me writing this tutorial.

A mask of choice or my mask LLM-Mask-1259 HERE.  

Halloween Nightmare font at Dafont.com HERE.


I also used Xenofex 2 constellation. This is a paid plug in and hard to find.  

If you do not have it, do not worry. The tag really does not need it.

 

Open a transparent image at 800x800. You can resize later.

Copy and paste paper 9 as a new layer. Add your mask  from image and merge group.

OPTIONAL:

Duplicate the mask layer and add  Xenofex 2 constellation. Adjust your settings to the

way you like it on your canvas. I would show you my settings, but 

I forgot to take a screenshot of them.  :(


Copy and paste the white moon and move it to the upper right part of your tag.

I added the sparkles, moved it near the top, duplicated and flipped, and moved the

Copy towards the bottom of my tag.

For the leaves, I used the raster deform tool to smash them down, duplicated a few times 

and moved them around to make it look like they were covering the ground.

You can also find some free CU leaves on the internet.

There are also some leaves in my Happy Halloween Kit HERE,

if you want to use them. Resize them to fit your tag and to your satisfaction.

 

Grass: I colorized this to green and did not resize it. Duplicate and

 mirror make it look like it is going across the tag behind the house.

Tree 2 resized 75%.

Spooky tree, do not resize. Place it next to the other tree.

Grass_1  resized 50%.

Grass_3 resized 50%.

Scary House resized 50%.

Transparent ghost resized to 50% and mirrored, then resized 75%.

Bat resized to 40%.

Ghost resized to 25.

Ghost with trick or treat bag resized to 25%.

Pumpkin resized to 25%.

Pumpkin with hat resized to  25%.

Pumpkin_3 resized to 25%.

Haunted flying bats resized to 35%. Place them up around the moon.

Toosh Toosh Cat resized to 30% and mirrored.

Toosh Toosh Witch is not resized. Place near the cat with 

the cat looking like it is looking at the witch.


Too Cute To Spook WA resized to 75%.  For the word art, I took my selection tool and 

separated the words.  Too Cute and To Spook. I also added a gradient glow.

 

Now resize your tag and make sure everything is arranged the way you like it.

Add your name and copyright for the image(s) you use.

I used Halloween Nightmare with a paper, black stroke at two.

 

Thank you for trying my tutorial! 

Please let me know how you liked it!

 

 If you try my tutorial, please send me your results.

I would love to see them and show them off!

If you have any questions, feel free to contact me.

I will answer you as soon as I can.

 

 

 

My Disclaimer:

 

All tutorials on this blog are written by me from my own imagination. Any

 similarities to other tutorials are purely coincidental. I use PSP2021 Ultimate and

PSP9, so the tools you use in your program may be called by a

 different name and may look different. 

 

 




Saturday, September 23, 2023

Fall Bounty Tutorial

 

 




Free Kit Fall Bounty by Tiny Turtle Designs HERE.

You will need to register at the store if you are not already registered.

 

My mask 1179 HERE.

It is the 4th one down.

Tube StellaFelice7 Sleeping fox tube at Pics for Design.

 

 

Are you ready? Let’s start!


Open a new blank image, 800x800. You can resize it later.

Copy and paste Tiny Turtles Fall Bounty Paper 18 as a new layer.

Layers, new mask layer, add mask, LLM mask 1179 from image. 

Layers, merge, merge group.

Stella Feliz, Sleeping Fox resized to 30%.

Element 5 Resized to 35%.

Element 95 Resized to 20%. Move to one side then Duplicate and mirror.

Element 96 Resized to 15%. Move to one side then Duplicate and mirror.

Element 2 resized to 25%. Move to one side then Duplicate and mirror.

 

Element 6 resized to 15 and image rotate 90%. Move middle and duplicate and mirror. I put one so that it looks like it is on top of the other.

Element 16 resized to 15%. Move to one side then Duplicate and mirror.

Element 46 Resized to 40%. Duplicate. Click on bottom one and add gradient glow and noise if you want.

ELEMENT 68-Resized to 25% Free rotated right 25 percent.

ELEMENT 62-Resized to 25%   Free rotated left 25 percent.

Element 116-Resized to 50%. Make sure this element stays on the top layer.

Now, arrange your tag to the way YOU like it. Resize if you want to.

Add your name, copyright, and license number if you need one.

 

I saved mine as a PNG.

 

Thank you for trying my tutorial! 

Please let me know how you liked it!

 

 If you try my tutorial, please send me your results.

I would love to see them and show them off!

If you have any questions, feel free to contact me.

I will answer you as soon as I can.

 

 

 

My Disclaimer:

 

All tutorials on this blog are written by me from my own imagination. Any

 similarities to other tutorials are purely coincidental. I use PSP2021 Ultimate and

PSP9, so the tools you use in your program may be called by a

 different name and may look different.

 

 

Friday, September 22, 2023

Days of Old Tutorial

 




 

Yes, Here I am with another tutorial. I hope you like it.

The supplies I used are as follows:

 

Molemina Scrapkit Old time HERE.

MC_Mask2 from Melissa’s Creationz HERE.

The mask is no longer available, so you will need a mask of choice if you don’t 

already have it. I am sure any mask will do.

2 Kajenna tubes at Pics For Design Taylor and Steampunk Cat.

 

 New image, 1000x1000.  We will resize it later.

New layer. Select all and copy and paste a paper of choice or paper 4 into selections. You can also just paste it as a new layer, up to you.

Add your mask or MC_Mask2 from image.

Merge, Merge group. Layers, duplicate, image, mirror.

Cluster 5 resized to 40%.

Magic Wand, set on add, click inside the frame, and expand selections to 15. Add a new layer below the frame and copy and paste the paper into selections.

I used the Kajenna tube (Taylor) and mirrored it.

Copy and paste your tube as a new layer, and position it in the frame the way you want it above the paper layer. Selections, Invert, Delete, then select none.

I also added another tube by Kajenna, called Steampunk. It is the cat tube. This goes above the Frame layer. I resized mine to 25%.

Element 90 resized to 40%. Free rotate to the right to 25.

Duplicate, Image, mirror image. Move this copy closer to the frame and place it to where you like it.

Element 29 (Rose) resized to 25%. Rotated 30%.

Duplicate this layer and mirror placing it on top of the other one.

Element 40-Magnifying glass resized to 10% and mirror it.

Add any other elements you want.
Resize to your liking. I resized mine by 75%.

I added the dust layer from the Taylor tube and resized it to 25%.

I also added the ring after resizing- Element 81 resized to 10%. I also mirrored this image.

Now, add your text. I used Old English Text Font. I believe it came with my PSP.

There is a similar Olde English Font at Dafont.com HERE.

Don’t forget your copyright and license if needed.

 

I saved mine as a PNG image.

 

You are done!

 

  I would love to see your results!

 

 I hope you liked my tutorial!

 

 

My Disclaimer:

All tutorials on this blog are written by me from my own imagination. Any 

similarities to other tutorials are purely coincidental. 

I use PSP2021 Ultimate and Paint Shop Pro 9, so the tools you

 use in your program may be called by a different name and may look different.  

 




Saturday, September 16, 2023

Happy Halloween Tutorial

 

With Halloween around the corner, I decided to create a Halloween tutorial. 

I used my Halloween kit, Happy Halloween. Although I believe any kit will do.

Please go visit my Graphics blog HERE to download the kit.

Any Halloween Tube. I used Lia. I do not know where to get her images anymore.

A mask of your choice or my Mask 1240 HERE.

Midnight Drive Font HERE.

A mask of your choice or Scrappy Bit of Fun Mask 0354  HERE.

Extra grass patch HERE. (Scroll down).


Here is what we will be making:




 

Got everything you need? Okay! Lets begin! 

Open a new image 800 x 800. Add a new layer, select all.

Copy and paste Paper 6 into selections. Deselect.

Add mask from image and merge group.

Add another layer and copy and paste Paper 1 into selections. Deselect.
Add mask from image and merge group.

Resize this layer to 85%.

Add a new raster layer, select all and paste Paper 1 into selections. Deselect.

Add Scrappy Bit of Fun’s mask 0354 from the image and merge the group. I resized this layer 95%.

Actually, it is not necessary to add all three layers of masks. You can always 

delete one or two if you do not like the way the tag looks. 

 Castle resized to 70%.

Tree 2 resized to 50%.

Tree (2) resized to 40%. Put this layer under the Castle layer.

Bat resized to 35%. Move it to the top near the moon.

I put a Lia Tube on the moon and resized it to 35%.

The fox Lia tube is resized to 25%. I also mirrored it.

And what is a Halloween tag without a ghost? I chose Ghost 1 and resized it to 40%. I also lowered the layer properties to 75.

I also put this layer under the castle layer. See my tag above.

I also added Ghost with pumpkin and resized it to 40%. I also put this layer under the castle layer.

Pumpkins resized to 40%.

Grass_1 resized to 15%. I colorized this element to brown.  Colorizing this element is NOT a necessity.

I also added the extra grass patch. I resized it to 30% and put it under the pumpkins layer.

Squirrel resized to 30%.

Highlight the Tree 2 layer.

Copy and paste Pumpkin 3 and resize it to 50%.

Copy and paste Pumpkin 2 and resize it to 40%.

Highlight your top layer and copy and paste Trick_Treat_Bag 1 as a new layer. I resized mine to 50

I added the Sparkles and Sparkles-1 elements. I did not resize the Sparkles elemet

I resized Sparkles-1 to 75%, duplicated it, image free rotated to 45.

Choose a moon. I chose Moon_1 and resized it to 35%. Move it to the top on one of the corners.

Add a gradient glow, or use the tutorial  HERE  for the gradient glow effect, if you do not have the effect. My settings are below. Play around with your settings and set to the one you like the best. I added mine two times. 







 

Now we are getting to the end.

Add any other elements you want.

Arrange the elements to the way YOU like them. (I hardly ever follow a tutorial 100%) 

I do not merge my layers in case I want to change something at a later date.

Add your names with a font of your choice or the one I

 mentioned in the beginning of this tutorial.

 Add your copyrights, then resize it

to your liking. I use Pixelette for my copyrights and my tag'd by line.

 

Save as a PNG or JPEG and you are done!

 

Thank you for trying my tutorial! Please let me know

how you liked it!

 

If you try my tutorial, please send me your results.

I would love to see them and show them off!

If you have any questions, feel free to contact me. 
I will answer you as soon as I can.


My Disclaimer:

All tutorials on this blog are written by me from my own imagination. Any 

similarities to other tutorials are purely coincidental. I use PSP2021 Ultimate, so the tools you

use in your program may be called by a different name and may look different.